O0001( PART NAME=MILL )
( A HAWK RIDGE SYSTEMS POST PROCESSOR )
( -------WWW.HAWKRIDGESYS.COM-------- )
( SUPPORT@HAWKRIDGESYS.COM 877.266.4469 )
(MILL.SLDPRT)
( CAMWORKS POST PROCESSOR : MACH3_MILL.CTL )
( 9-21-2020  - 15:58:57 )

(TOTAL MACHINE TIME:0 HRS. 1 MIN. 3 SEC.) 

(NUM  TOOL TYPE   DIAM    RAD   H   D    DESCRIPTION) 
(---  ---------  ------  ----- --- ---   -----------) 
(T14    END MILL 0.3750 0.0000 H14 D14  3/8 EM CRB 2FL 1 LOC)
(T11     DRILL   0.2570 0.0000 H11 D11  F SCREW MACH DRILL)

N5 G20 G64
(CONTOUR MILL1)
(3/8 EM CRB 2FL 1 LOC)
N10 G91 G28 Z0
N15 G90
N20 T14 M06
N25 S4000 M03
N30 G00 G90 G54 X.1832 Y1.6636
N35 G43 H14 Z1. M08
N40 Z.1
N45 G01 Z-.5 F8.
N50 G41 D14 X.0453 Y1.8015 F24.
N55 G03 X.0188 Y1.8125 I-.0265 J-.0265
N60 G01 X-2.275 F32.
N65 G03 X-2.3375 Y1.75 I0 J-.0625
N70 G01 Y-1.75
N75 G03 X-2.275 Y-1.8125 I.0625 J0
N80 G01 X2.275
N85 G03 X2.3375 Y-1.75 I0 J.0625
N90 G01 Y1.75
N95 G03 X2.275 Y1.8125 I-.0625 J0
N100 G01 X-.0187
N105 G03 X-.0453 Y1.8015 I0 J-.0375
N110 G40 G01 X-.1832 Y1.6636
N115 G00 Z.1
N120 Z1. M09
N125 G91 G28 Z0
N130 G90
N135 M01

(DRILL1)
(F SCREW MACH DRILL)
( A HAWK RIDGE SYSTEMS POST PROCESSOR )
( -------WWW.HAWKRIDGESYS.COM-------- )
N140 T11 M06
N145 S4000 M03
N150 G00 G90 G54 X-2.65 Y2.125
N155 G43 H11 Z1. M08
N160 G81 G98 R.1 Z-.8032 F12.
N165 Y-2.125
N170 X2.65
N175 Y2.125
N180 G80
N185 G00 Z1. M09
N190 G91 G28 Z0
N195 G91 G28 Y0
N200 M30