%
O0001( PART NAME=UPDATED_POST_CODE )
( A HAWK RIDGE SYSTEMS POST PROCESSOR )
( -------WWW.HAWKRIDGESYS.COM-------- )
( SUPPORT@HAWKRIDGESYS.COM 877.266.4469 )
(MILL.SLDPRT)
( CAMWORKS POST PROCESSOR : MACH3_MILL.CTL )
( 9-22-2020  - 09:03:26 )

(TOTAL MACHINE TIME:0 HRS. 1 MIN. 3 SEC.) 

(NUM  TOOL TYPE   DIAM    RAD   H   D    DESCRIPTION) 
(---  ---------  ------  ----- --- ---   -----------) 
(T14    END MILL 0.3750 0.0000 H14 D14  3/8 EM CRB 2FL 1 LOC)
(T11     DRILL   0.2570 0.0000 H11 D11  F SCREW MACH DRILL)

(CONTOUR MILL1)
(3/8 EM CRB 2FL 1 LOC)
N5 G17 G20 G40 G49 G80 G90
N10 G91.1
N15 T14 M6
N20 S4000 M3
N25 G0 G90 G54 X.1832 Y1.6636
N30 G43 H14 Z1. M8
N35 Z.1
N40 G1 Z-.5 F8.
N45 G41 D14 X.0453 Y1.8015 F24.
N50 G3 X.0188 Y1.8125 I-.0265 J-.0265
N55 G1 X-2.275 F32.
N60 G3 X-2.3375 Y1.75 I0 J-.0625
N65 G1 Y-1.75
N70 G3 X-2.275 Y-1.8125 I.0625 J0
N75 G1 X2.275
N80 G3 X2.3375 Y-1.75 I0 J.0625
N85 G1 Y1.75
N90 G3 X2.275 Y1.8125 I-.0625 J0
N95 G1 X-.0187
N100 G3 X-.0453 Y1.8015 I0 J-.0375
N105 G40 G1 X-.1832 Y1.6636
N110 G0 Z.1
N115 Z1. M9
N120 G53 G90 Z0 M5
N125 M1

(DRILL1)
(F SCREW MACH DRILL)
( A HAWK RIDGE SYSTEMS POST PROCESSOR )
( -------WWW.HAWKRIDGESYS.COM-------- )
N130 G17 G20 G40 G49 G80 G90
N135 G91.1
N140 T11 M6
N145 S4000 M3
N150 G0 G90 G54 X-2.65 Y2.125
N155 G43 H11 Z1. M8
N160 G81 G98 X-2.65 Y2.125 Z-.8032 R.1 F12.
N165 X-2.65 Y-2.125
N170 X2.65 Y-2.125
N175 X2.65 Y2.125
N180 Z1. M9
N185 G80
N190 G53 G90 Z0 M5
N195 G53 G90 Y0
N200 M30
%