( A HAWK RIDGE SYSTEMS POST PROCESSOR )
( -------WWW.HAWKRIDGESYS.COM-------- )
( SUPPORT@HAWKRIDGESYS.COM 877.266.4469 )

O0001(LATHE)
(REV       : 1)
(MACHINE   : OKUMA GENOS L2000-E)
(CONTROL   : OSP-P300LA)
(DATE: 12-18-2019 TIME 16:36:12)

(                    - - - - UPPER TURRET TOOL - - - -                    )
( NUM  OFFSET      TOOL TYPE        NOSE RAD          TOOL COMMENT        )
(----  ------  ------------------  ----------  -------------------------- )
(T01     01      80 DEG. DIAMOND      0.016    CNMG 431 80DEG SQR HOLDER  )
(T05     05      DRILL                         1 SCREW MACH DRILL         )

(TOTAL MACHINE TIME:0 HRS. 2 MIN. 18 SEC.)

(-TURN ROUGH1-)
( T0101 = CNMG 431 80DEG SQR HOLDER)
N1 G18 G20 G40 G99
N2 T0101
N3 G50 S5000 M42
N4 G96 S1800 M03
N5 G00 Z.2071 M08
N6 X3.9141
N7 G01 X3.7 Z.1 F.0161
N8 Z-4.9735
N9 X3.9951 Z-5.0326
N10 G03 X4.04 Z-5.0657 L.0357
N11 G01 Z-6.7557
N12 X4.1
N13 X4.1141 Z-6.7486
N14 G00 X4.3141
N15 Z.1071
N16 X3.3821
N17 G01 X3.368 Z.1
N18 Z-4.9071
N19 X3.7 Z-4.9735
N20 X3.7184 Z-4.9696
N21 G00 X3.9184
N22 Z.1071
N23 X3.0501
N24 G01 X3.036 Z.1
N25 Z-4.8407
N26 X3.368 Z-4.9071
N27 X3.3864 Z-4.9032
N28 G00 X3.5864
N29 Z.1071
N30 X2.7181
N31 G01 X2.704 Z.1
N32 Z-4.7743
N33 X3.036 Z-4.8407
N34 X3.0544 Z-4.8368
N35 G00 X3.2544
N36 Z.1071
N37 X2.3861
N38 G01 X2.372 Z.1
N39 Z-1.6669
N40 X2.5191 Z-1.7405
N41 G03 X2.54 Z-1.7657 L.0357
N42 G01 Z-3.1407
N43 G03 X2.5395 Z-3.1451 L.0357
N44 G01 X2.372 Z-3.827
N45 Z-4.7079
N46 X2.3904 Z-4.704
N47 X2.4204
N48 G00 X2.5904
N49 Z-3.827
N50 X2.4048
N51 G01 X2.372
N52 X2.1658 Z-4.6667
N53 X2.704 Z-4.7743
N54 X2.7224 Z-4.7704
N55 G00 X2.9224
N56 Z.1071
N57 X2.0541
N58 G01 X2.04 Z.1
N59 Z-1.5009
N60 X2.372 Z-1.6669
N61 X2.392
N62 G00 X2.592
N63 Z.1071
N64 X2.0341
N65 G01 X2.02 Z.1
N66 Z-1.5051
N67 X2.5049 Z-1.7475
N68 G03 X2.52 Z-1.7657 L.0257
N69 G01 Z-3.1407
N70 G03 X2.5196 Z-3.1438 L.0257
N71 G01 X2.1441 Z-4.6731
N72 X3.9877 Z-5.0418
N73 G03 X4.02 Z-5.0657 L.0257
N74 G01 Z-6.7657
N75 X4.0686
N76 X4.0827 Z-6.7586
N77 G00 X4.2827
N78 G00 X20. Z5. M09
N79 G00 G28 U50. W50.
M01

(-DRILL1-)
( T0505 = 1 SCREW MACH DRILL)
N80 G18 G20 G40 G99
N81 T0505
N82 G97 S3880 M03
N83 G00 Z.1 M08
N84 X0
N85 G74 X0 Z-6.75 D.1 L.1 K0 F.006 E0
N86 G00 X20. M09
N87 Z5.
N88 G00 G28 U50. W50.
N89 M05
N90 M30