( A HAWK RIDGE SYSTEMS POST PROCESSOR )
( -------WWW.HAWKRIDGESYS.COM-------- )
( SUPPORT@HAWKRIDGESYS.COM 877.266.4469 )

O0001(MILL)
()
(MSG,CUSTOMER NAME=HAWK RIDGE SYSTEMS)
(POSTED DATE & TIME: 12-18-2019  - 16:07:23 )

(TOTAL MACHINE TIME:0 HRS. 0 MIN. 59 SEC. )

(NUM  TOOL TYPE   DIAM    RAD   H   D    DESCRIPTION) 
(---  ---------  ------  ----- --- ---   -----------) 
(T02  END MILL   0.3750 0.0000 H02 D02  3/8 EM CRB 2FL 1 LOC)
(T04  DRILL      0.2570 0.0000 H04 D04  F SCREW MACH DRILL)
()
(OPERATION NAME: CONTOUR MILL13)
(3/8 EM CRB 2FL 1 LOC)
(CUTTER COMP: ON - TOOL CENTER )
N1 G0 G17 G20 G40 G80 G90 G94
NT2 G111 T2 Q4
N2 G0 G15 H1 X3.2082 Y4.1636 S6000 M3
N3 Z2. M8
N4 Z1.1
N5 G1 Z.5 F20.
N6 G41 D2 X3.0703 Y4.3015
N7 G3 X3.0438 Y4.3125 I-.0265 J-.0265
N8 G1 X.75 F40.
N9 G3 X.6875 Y4.25 I0 J-.0625
N10 G1 Y.75
N11 G3 X.75 Y.6875 I.0625 J0
N12 G1 X5.3
N13 G3 X5.3625 Y.75 I0 J.0625
N14 G1 Y4.25
N15 G3 X5.3 Y4.3125 I-.0625 J0
N16 G1 X3.0063
N17 G3 X2.9797 Y4.3015 I0 J-.0375
N18 G40 G1 X2.8418 Y4.1636
N19 G0 Z1.1
N20 Z2. M9
N21 G30 P1
N22 M1
()
(OPERATION NAME: DRILL7)
(F SCREW MACH DRILL)
NT4 G111 T4 Q2
N23 G0 G15 H1 X.375 Y4.625 S2000 M3
N24 Z2. M8
N25 G71 Z2.
N26 G83 R1.1 Z.1728 Q.1 F10. M53
N27 Y.375
N28 X5.675
N29 Y4.625
N30 G80 Z2. M9
N31 G30 P1
N32 M30