'----------------------------------------------------------------
'SHOPBOT ROUTER FILE IN INCHES
'GENERATED BY SOLIDWORKS CAM/CAMWorks
'----------------------------------------------------------------
'Customer = 
'Program Number = 0001
'Part File = Mill.SLDPRT
'----------------------------------------------------------------
'Material = 6061-T6 
'Length of material in X = 6.05
'Length of material in Y = 5.
'Depth of material in Z = 1.
'Minimum extent in X = 0.000 Minimum extent in Y = 0.000 Minimum extent in Z = 0.000
'Maximum extent in X = 0.000 Maximum extent in Y = 0.000 Maximum extent in Z = 0.000
'Rapid clearance gap or Safe Z = 2.

'NUM  TOOL TYPE   DIAM    RAD   H   D    DESCRIPTION) 
'---  ---------  ------  ----- --- ---   ----------- 
'T14   END MILL  0.3750    -   H14 D14  3/8 EM CRB 2FL 1 LOC
'T11    DRILL    0.2570    -   H11 D11  F SCREW MACH DRILL
'----------------------------------------------------------------
'UNITS:Inches
IF %(25)=1 THEN GOTO UNIT_ERROR  'check to see software is set to standard
SA
CN, 90
'New Path
'Toolpath Name = Contour Mill1
'Tool Name   = 3/8 EM CRB 2FL 1 LOC

&PWSafeZ = 2.
&PWZorigin = Table Surface
&PWMaterial = 1.
&Tool =14
C9
TR,4000
C6
PAUSE 2
'
MS,.533333,.133333
J2,3.208152,4.163631
JZ,1.
MZ,-.5
M3,3.070267,4.301517,-.5
CG,0.075000,3.04375,4.3125, , ,T,-1.
M3,.75,4.3125,-.5
CG,0.125000,.6875,4.25, , ,T,-1.
M3,.6875,.75,-.5
CG,0.125000,.75,.6875, , ,T,-1.
M3,5.3,.6875,-.5
CG,0.125000,5.3625,.75, , ,T,-1.
M3,5.3625,4.25,-.5
CG,0.125000,5.3,4.3125, , ,T,-1.
M3,3.00625,4.3125,-.5
CG,0.075000,2.979733,4.301517, , ,T,-1.
M3,2.841848,4.163631,-.5
JZ,.1
JZ,1.
C7
'New Path
'Toolpath Name = Drill1
'Tool Name   = F SCREW MACH DRILL
&Tool =11
C9
TR,4000
C6
PAUSE 2
'
MS,.903554,.2
J2,.375,4.625
JZ,1.
JZ,.1
MZ, -.803157
JZ,1.
MS,.903554,.2
J2,.375,.375
JZ,.1
MZ, -.803157
JZ,1.
MS,.903554,.2
J2,5.675,.375
JZ,.1
MZ, -.803157
JZ,1.
MS,.903554,.2
J2,5.675,4.625
JZ,.1
MZ, -.803157
JZ,1.
C7
END
'
'
UNIT_ERROR:
CN, 91
END